EuroRope provides professional MRT and EMAG wire rope inspection services for companies operating cranes, lifting installations and other critical hoisting equipment. From inspection planning and on-site testing to analysis and practical advice, we provide complete support throughout the entire inspection process.
What is EMAG – MRT wire rope inspection?
Magnetic Rope Testing, also known as MRT or EMAG wire rope inspection, is a non-destructive testing method used to assess the internal and external condition of steel wire ropes. During the inspection, the wire rope passes through specialised magnetic testing equipment. Changes in the magnetic field are measured and recorded, helping our specialists identify possible defects and deterioration within the rope.
EMAG / MRT inspection can help detect:
- Internal and external wire breaks
- Localised defects
- Corrosion
- Loss of metallic cross-sectional area
- Irregularities and deformation
- Areas requiring further investigation
This provides a more complete understanding of the rope’s condition than visual inspection alone. MRT / EMAG inspection is one of the methods we use as part of our broader crane wire rope services.
Why inspect your wire ropes?
Steel wire ropes are critical components within cranes and lifting installations. Wear, corrosion and repeated loading can gradually affect their condition and performance. Regular inspection helps you identify deterioration before it develops into a serious safety risk or causes unexpected downtime.
The inspection results help you make informed decisions about continued use, additional inspection, maintenance or replacement. MRT/EMAG results are also recorded in the same inspection and certification system used for the rest of your equipment.
MRT / EMAG inspection supports:
- Safer lifting operations
- Early detection of hidden defects
- Better maintenance planning
- Reduced risk of unexpected rope failure
- Prevention of unnecessary rope replacement
- Improved insight into the remaining condition of the rope
- Compliance with inspection and maintenance requirements
Complete EMAG & MRT service
EuroRope provides more than a standalone measurement. We support customers throughout the complete process, from the initial inspection request to clear recommendations based on the results.
Inspection planning
Every installation and wire rope application is different. Before the inspection, we review the equipment, rope configuration, operating conditions and available technical information. This allows us to determine the most suitable inspection approach and prepare the work safely and efficiently.
On-site EMAG / MRT inspection
Our specialists perform the inspection at your location using professional magnetic rope testing equipment. Where possible, the rope is tested throughout the relevant operating length. Measurements are recorded for further assessment and interpretation.
Analysis and reporting
After the inspection, the collected data is analysed to identify abnormalities, deterioration and areas that may require additional attention. You receive a clear report containing the inspection findings and an overview of the rope’s observed condition.
Practical advice
Inspection data is only valuable when it leads to clear decisions. EuroRope translates the findings into practical recommendations for your organisation. Depending on the results, our advice may include:
- Continued operation
- Additional visual or technical inspection
- Increased monitoring frequency
- Maintenance or lubrication
- Repair of related components
- Planning for future rope replacement
- Immediate replacement where required
Our objective is to help you make a safe and technically responsible decision.
Applications
MRT / EMAG inspection can be used for steel wire ropes in a wide range of lifting and crane applications, including:
- Mobile cranes
- Tower cranes
- Overhead cranes
- Gantry cranes
- Harbour and offshore cranes
- Industrial lifting installations
- Winches and hoisting systems
- Heavy lifting equipment
- Other safety-critical wire rope applications
The suitability of MRT / EMAG inspection depends on the rope type, diameter, construction, accessibility and installation. EuroRope can assess your application and advise on the most appropriate inspection method.
When is EMAG / MRT inspection recommended?
EMAG / MRT inspection is particularly valuable when:
- The internal condition of the rope cannot be assessed visually
- The rope is used in a safety-critical lifting application
- Corrosion or internal wear is suspected
- The rope has been exposed to demanding operating conditions
- Unexpected damage or abnormal wear has been observed
- Additional certainty is required before continued use
- Inspection is required as part of a maintenance programme
- Rope replacement needs to be planned more accurately
EMAG / MRT inspection should be considered part of a broader inspection and maintenance strategy. Visual inspection, operational history, rope measurements and the condition of associated components remain important when evaluating the complete installation.
FAQ
What is MRT – EMAG wire rope inspection?
Magnetic Rope Testing (MRT), also known as EMAG wire rope inspection, is a non-destructive testing method used to assess the internal and external condition of steel wire ropes by measuring changes in a magnetic field as the rope passes through specialised testing equipment.
What defects can MRT / EMAG inspection detect?
MRT / EMAG inspection can detect internal and external wire breaks, localised defects, corrosion, loss of metallic cross-sectional area, irregularities and deformation, and areas requiring further investigation, providing a more complete picture than visual inspection alone.
Why should I inspect my wire ropes with MRT / EMAG?
Steel wire ropes deteriorate through wear, corrosion, and repeated loading. MRT / EMAG inspection helps identify this deterioration before it becomes a safety risk or causes unexpected downtime, supporting safer operations and better maintenance planning.
What does the MRT / EMAG inspection process involve?
Our service covers the complete process: inspection planning based on your equipment and operating conditions, on-site inspection using professional magnetic rope testing equipment, analysis and reporting of the results, and practical advice on next steps.
What kind of advice do I receive after an inspection?
Depending on the results, our advice may include continued operation, additional visual or technical inspection, increased monitoring frequency, maintenance or lubrication, repair of related components, or planning for rope replacement.
Which applications is MRT / EMAG inspection suitable for?
MRT / EMAG inspection is used on wire ropes in mobile cranes, tower cranes, overhead and gantry cranes, harbour and offshore cranes, industrial lifting installations, winches, hoisting systems, and other safety-critical wire rope applications.
When is MRT / EMAG inspection recommended?
It’s particularly valuable when the internal condition of a rope can’t be assessed visually, when the rope is used in a safety-critical application, when corrosion or internal wear is suspected, or when additional certainty is needed before continued use or as part of a maintenance programme.
Is MRT / EMAG inspection a replacement for visual inspection?
No, MRT / EMAG inspection should be part of a broader inspection and maintenance strategy. Visual inspection, operational history, rope measurements, and the condition of associated components all remain important when evaluating the complete installation.
Where are the inspection results stored?
MRT / EMAG results are recorded in the same inspection and certification system used for the rest of your equipment, giving you a complete, traceable overview in one place.